| Technical Specifications: |
- with 3 Sanding belts and a Scotch-Brite-roll for the calibration, veneer and varnish sanding. With a constant working height and in the following performance
Sanding units:
Contact roller unit. -Grooved steel contact roller ø175 mm for accurate mass calibration
- Mechanical adjustment of the contact roller for balancing grain
- Pneumatic raising of the contact roller
Wide belt aggregate electronically controlled sanding pad with ISA system 22/44 mm
Wide belt aggregate - electronically controlled sanding pad with ISA system 22/44 mm
- Sanding belt blowers, pulse controlled
Feinsanding aggregate - Scotch-Brite-roller, diameter 170 mm
ISA (Intelligent sanding pressure adjustment) -
- patented segment press bar system full tolerance compensation
- pressing width 44 mm (in longitudinal and transverse movement)
- -Universal lamella with point control for all the sanding width (between the veneer and solid wood sanding is not necessary to be changed the sanding lamella)
- Tolerance compensation + / - 1 mm
ISA Control
- High-Resolution workpiece detection with two switch rolles depending pressure
- Free feeding complex
- Multiple charging with a small lateral distance
- sanding intensity individually adjustable on all sides
- Print page about pressure regulator adjustable
- Feed controlled entry and exposure
Drive
- Belt speed of 18 m / sec for high removal
- Wear-free DC braking
- self stretching belt drive
Band control - automatic compensation of unequal lengths sanding belt edges
- Abrasive belt tracking on optical non-contact and self-cleaning belt changing side
- Fine adjusting of the oscillation at belt changing side
- belts blowers switch left and right
Control - Touch HMI TP177 s / w to set and register of all electrical functions with memory for 50 programs
Overthickness of the workpiece - Machine safety bar at the inlet with the following functions
- Automatic lifting of the contact roller and the segment press bar
- Feed off
Feeding - rubberized and spring-loaded rollers before and after the sanding station
- Safe transport of workpieces by loading of many details by pressure plates with tolerance compensation
- High quality conveyor belt made of natural rubber
- vakuum transport table, with a 4.0 kW blower
- Variable feeding speeds for calibration and fine sanding
- table extension of 400 mm at the inlet and outlet with wheels
- additional Folding table on outlet
Technical data;
Working width: 1350 mm
motor units 1 +2: 15.0 kW
motor unit 3: 11.0 kW
Scotch-Brite drive roller. 1.1 kW
Feeding motor: 1.3 kW
Vacuum blower motor: 4.0 kW
adjustment by height motor (frequency controlled), 0.55 kW
Sanding belt speed:
Units 1 & 2: 18 m / s
Unit 3 (frequency controlled): about 2-18 m / s
Abrasive Belt dimensions (W x L): 1370x2150 mm
Transport belt dimensions. (WxL); 1350x3500 mm
Workpiece thickness (min / max.): 4-140 mm
Working height (constant): 850 mm
Feed speed: 2-12 m / min
Compressed air: 5.5 bar
Compressed air connection: R3 / 8 "
Operating voltage: 3X400 Volt/N/PE50 Hz
Control voltage: 24V DC
Wiring: according to EC directives
Paint colour. RAL 9002 white (structure), and input and ootput RAL 3001 red Safety according to CE standard
optimal improved ventilation system to comply with the TRK-values, dust tested
Convenience package consisting of:
- Touch HMI TP177 s / tw for adjustment and saving all the electrical functions with memory for 50 programs
- Weber AWDM automatic thickness adjustment on the engine inlet with a starting switch for easy measurement of long workpieces, with an automatic feed and programmable start / stop control
|
SANDING MACHINES 